Ace Cleaning Equipment

Cleaning Equipment For The Professional

FRANK HEAVY DUTY HOT WATER PRESSURE WASHER

For a great variety of applications, Frank engineers have developed the high quality hot water high pressure cleaners. The entire life of these series is characterized by advanced technology according to international standards.
Modern series techniques, high standard production technology and the FRANK quality assurance according to DIN ISO 9001:2000 mark these products. High quality components and fittings ensure trouble-free operation.

impact-series
Our solution for daily cleaning, with a capacity up to max. 180 bar, max 15 l/min. and the following control options:

TCC:
Electronic remote control for 3 programs: "COLD", "HOT" and "HOT WITH ADDITIONAL DETERGENT"

DMP:
Pressure switch control VARIO-STOP with cutoff delay system, high-pressure/steam stage.

TS:
Total-Stop-Control

effect-series
The configuration for special requirements with the capacity of up to max. 240 bar, max. 23 l/min. and control options of TCC, DMP and TS.

FRANK-High performance water heater
Solid heating coil made of thick-walled precision steel, equipped with the FRANK oil automizer burner. The optimal flow of combustion gases ensure an environmentally clean combustion and high efficiency.

FRANK-Oil automizer burner
Compact unit with integrated oil preheater and its own motor.

FRANK-Dual-Telecontrol
Reducing the consumption of cleaning detergents by 1/3
The newly developed Dual-2 Phase technique offers these decisive advantages due to the remote controlled program selection of the operating stages low-pressure, pre-spraying and high pressure.
The hot low-pressure spray jet, together with a highly concentrated detergent, achieves a maximum of washing efficiency. The optimally dissolved dirt particles are removed powerfully by the high pressure jet.
There is no waste of unused cleaning detergent as is the case when applying the high-pressure jet together with detergents. Additional pre-spraying equipment is not necessary.

Pre-spraying, hot
10 bar - 3 l/min - max. 70°C

High pressure, cold
Without detergent - 210 bar - 17 l/min

High pressure, hot
210 bar - 17 l/min

Technical spec.

Series Type FH 711 TS FH 918 TS FH 1021 TS FH 711 DMP FH 711 TCC FH 918 DMP FH 918 TCC
                                              

                 

                                                  
Operating pressure max. (bar) 115 180 210 115 115 180 180
Volume flow max. (l/h) 700 900 1020 700 700 900 900
Operating temperature max. (°C) 100 100 100 150 150 150 150
Mains conncetion (V-50Hz) 230/1 400/3 400/3 230/1 230/1 400/3 400/3
Nominal consumption (kW) 2,9 5,3 7,3 2,9 2,9 5,3 5,3
Heating capacity (kW) 65 65 65 65 65 65 65
Fuel oil consumption (kg/h - l/h) at 60°C 3,4 - 4,1 4,4 - 5,3 5,0 - 6,0 3,4 - 4,1 3,4 - 4,1 4,4 - 5,3 4,4 - 5,3
Mechanical spray Gun * * * * - * -
Telecontrol spray gun - - - - * - *
Triple-plunger pump * * * * * * *
10m high pressure hose, spray gun and lance - - - * * * *
8m high pressure hose, spray gun and lance * * * - - - -
Weight (kg) 165 170 180 165 165 170 170
Dimensions LxWxH (mm) 1245 x 590 x 845 1245 x 590 x 845
DESCRIPTION OF SYMBOLS
TS TS-marked models are basic of impact-series
DMP START/STOP by means of Pressostat "VARIO STOP" via mechanical spray gun
TCC Telecontrol-Remote control with program selection on the spray gun, start withour pressure, automatical pressure discharge when the machine stops
* available
- not available